iPad Stuck in Reboot Loop? Here Are the Fixes!

Perhaps you have faced the same issue that your iPad stuck in boot loop and you need a workable to get it out of the problem. No worry, we will introduce 5 proven ways to fix iPad stuck in reboot loop quickly without losing data.

Before trying each method for fixing iPad boot loop, you can check the comparison among the 5 troubleshooting ways in the below chart.

Method	Success Rate	Allotted Time Required	Data Loss
AnyFix – iPad System Repair	99.9%	5 minutes	NO
Force Restart	20%	5 minutes	NO
iTunes Repair	60%	> 30 minutes	YES
Recovery Mode	60%	> 30 minutes	YES
Factory Reset iPad	60%	> 30 minutes	YES

Method 1. Fix iPad Stuck in Boot Loop with AnyFix – Ultimate Way

When the iPad stuck in boot loop, you may fail to do anything on it. So the most effective way is using an iPadOS repair tool to end iPad boot loop. AnyFix is professional in fixing iPad system issues. It handles issues such as unresponsive screen, frozen screen, iPad black screen, boot loop, and more. It prides itself as the most efficient system repair software because of the mindblowing features it powers which have been confirmed to be highly effective. You can see the key features of AnyFix below:

• Repair boot loop and 150+ other system-related issues on any iPhone or iPad model.
• Quickly and safely repair the system without data loss.
• Clear 200+ iTunes errors without compromising your data.
• Suitable for all iOS and iPadOS versions.

Steps to End iPad Boot Loop with AnyFix:

Download and install AnyFix on your computer.

Step 1: When the software opens, proceed to where you have the System Repair tab and select Repair Now.

Afterward, you have to link your iPad to your computer to establish a connection with the software. To achieve this, get a certified USB cable and connect it to the right ports on your iPad and the computer.

Step 2: Should the software detect your connection, the screen down here will come up on your computer:

Select Screen Stuck on the left sidebar on the screen displayed. Once done, hit the Start Now button at the bottom to proceed.

Step 3: Next, you have to choose a repair mode to fix the underlying issue on your iPad. Select Standard Repair from the options shown on your screen.

Hit the Standard Repair button at the bottom of the same interface and move to the next stage of the guide.

Step 4: Without hesitation, AnyFix will perform a quick scan on your device so it can recommend the best firmware package to fix iPad boot loop issues. Click Download on the subsequent screen that appears.

Step 5: Once done, click Start Standard Repair so AnyFix can commence the repair process. Wait patiently until the repair is completed.

Do not interact with the connection while the repair is on to avoid interruption. When the process is completed, disconnect the iPad from the computer.

Method 2. Force Restart iPad

Next, we suggest force restarting your iPad whenever the iPad stuck in boot loop issue occurs. This solution aims to help you refresh your device by clearing bugs and temporary glitches that are responsible for the underlying issue.

Force restart is very easy to implement but depending on the iPad model you own, the procedure may differ. Here’s a simple guide for the different iPad models, select and apply the one that matches your device type:

iPad without Home Button

1. As quickly as possible, press down the Volume Up button and release.
2. Hold down the Volume Down button and release it.
3. Proceed to the top of the device, press down the button found there and keep holding till the Apple logo pops up on your screen.

Below is a pictorial representation of this guide:

iPad with Home Button

Simultaneously press down the Home key and Top button.

Keep holding the buttons till your screen displays the Apple logo, then you can release them.

Method 3. Use iTunes to Restore Your iPad

Should force restart fail to fix the iPad stuck on boot loop screen issues, then you should consider restoring the device. By restoration, we mean wiping all installed content and settings found on the device so it can function properly. This solution can be completed via the iTunes app by putting the faulty iPad in recovery mode.

Here’s a quick guide to follow to restore your iPad via iTunes:

Step 1: Start with installing the most recent version of iTunes on your Windows or macOS Monterey or earlier version. Launch the app afterward and proceed to the next step.

Step 2:  Next, enter recovery mode on the faulty iPad. Use any of the guides below that suits your iPad model to activate recovery mode:

iPad without Home Button

1. Long press the Volume Up button and release it.
2. Do the same thing for the Volume Down button.
3. Lastly, press down the Side button until you see the recovery mode screen, then release.

iPad with Home Button

Hold the Home button and Power button together at the same time.

Keep holding the buttons till your device shows the recovery screen, and then you can release them.

The image down here represents the illustrative guides above:

Here’s what recovery mode screen looks like:

Step 3: Connect your iPad to the computer using the appropriate USB cord. Once iTunes detects your device, it will show the prompt below:

Tap on Restore. Afterward, confirm your action by hitting the restore icon when the prompt appears. iTunes will commence the restoration of your iPad in no time and the underlying issue should be fixed.

Method 4. Repair iPad Boot Loop in Recovery Mode

In case iTunes can’t detect your device in recovery mode, you should enable DFU mode to resolve the underlying issue. This solution wipes your device as we mentioned above. If you don’t mind losing data, follow these steps to fix iPad stuck in boot loop:

Launch iTunes on your computer.

Step 2: Enable DFU Mode on your iPad by holding the right keys. Use the illustrative guide that matches your iPad model from the procedure down here:

iPad without Home Button

Start by holding down the Volume Up button, then release.

Press the Volume Down button and release it.

Now, long press the Side button until your screen goes blank. Afterward, hold down the Volume Down button together with the Side button for 5 seconds.

Once done, release the Side button and hold down the Volume Down button for 5 seconds DFU mode will be activated.

iPad with Home Screen

Hold the Home button and Power button concurrently for about 10 seconds.

Next, release the Power button and keep holding the Home key for 4-5 seconds. Your screen will immediately go blank which signals DFU mode.

Step 3: Connect the iPad to the computer and iTunes will display the prompt below:

Click OK and select Restore. iTunes will wipe the iPad and fix the current issue you are faced with.

If you can’t get out of iPad recovery mode after fixing the boot loop issues, check how to fix iPhone/iPad stuck in recovery mode.

Method 5. Factory Reset iPad in Settings

A quick reset on your iPad is another handy solution recommended by experts to fix iPad boot loop issues. Like the aforementioned solution, data loss will occur when carrying out a factory reset on your iPad as all content and custom settings are automatically wiped. However, there’s no need to connect the device to a computer system. Rather, it’s completed directly from the settings panel of the device.

Follow these steps to factory reset your iPad:

1. Proceed to the Settings panel by clicking on the gear icon on your home screen.
2. Locate the General icon and click on it to proceed.
3. Head down the subsequent interface and click on Transfer & Reset iPad.
4. Click on Erase All Content and Settings on the next screen.
5. Enter your screen passcode when the corresponding prompt appears and your iPad will be returned to factory mode.

For those who don’t know the Apple ID or passcode on their iPad, there is a guide on how to factory reset iPad without Apple ID or passcode.

FAQs about iPad Boot Loop

Q1. Why is my iPad stuck in boot loop?

iPad boot loop issues are caused by one of the following:

• Damaged Screen
• Jailbreaking
• iOS Issues

Q2. Can I fix iPad stuck in boot loop without data loss?

Sure, you can! From the solutions recommended above, it’s suggested that force restart and iOS repair software fix iPad boot loop issues without data loss. However, the latter is the best solution to resolve the underlying issue as it fixes everything including those that are yet to stem up.

Conclusion

Having read this guide, fixing iPad stuck in boot loop issues shouldn’t be challenging. We suggested 5 solutions to fix the underlying issue without stepping out of your comfort zone. You should select one or multiple and apply it to fix the iPad boot loop issues. However, AnyFix offers the ultimate solution. It repairs your device by updating the firmware package with no data loss.