Ringer on iPhone Not Working（7 Fixed）

I updated my iPhone Pro Max 13 two nights ago, and now my phone doesn’t ring when receiving calls. I checked all settings and restarted the iPhone, but still nothing. Anyone else have this problem?

This is a question asked by a user on Reddit. I believe that many people have encountered the same problem.

It is undoubtedly a frustrating feeling to suddenly find that your iPhone ringer is not working properly when you need it the most. However, don’t worry! In this article, we will provide you with a series of practical tips and solutions to help you quickly solve the problem of your iPhone ringer not working.

Why Are Ringer Not Working on The Iphone?

When your iPhone’s ringtone doesn’t work, it can cause missed calls and important notifications to go unnoticed. Before we solve this problem, let’s dive into some of the most common reasons why iPhone ringer don’t work.

1. Volume and mute settings

Your iPhone may be set to low volume or switched to silent mode, which may make the ringtone inaudible. The side switch on your iPhone controls silent mode, while the volume buttons adjust the ringer’s loudness.

2. Software issues and glitches

Volume and mute settings are the most basic reasons and we can easily check this issue. What many people don’t understand is that outdated iOS software or system failure may also cause iPhone ringtones to not work.

3. Hardware problem

In addition to software issues, sometimes the problem can be rooted in the hardware itself. You can recall whether your iPhone’s speaker has been damaged by water or other damage. This may also cause the iPhone’s ringtone not to work.

4. Do not disturb mode

Do Not Disturb mode silences incoming calls and notifications for a set time. Make sure this mode is not active when you want the ringtone to be on.

5. Bluetooth interference

If your iPhone is connected to a Bluetooth speaker or headphones, your ringtone may be played through that device instead of the phone’s built-in speakers.

6. Custom ringtone problem

Using custom ringtones can sometimes cause problems if the file is corrupted or unsupported.

Now let’s look at the reasons why iPhone ringer don’t work.

How To Solve Ringer on iPhone Not Working (Basic Method）

If your iPhone ringtone isn’t working, there are a few basic methods you can try to fix the problem. There are several steps you can take:

1. Check volume and mute settings

First, check the volume and mute settings on your iPhone. Locate the mute switch on the side of the device and make sure it doesn’t glow orange (this means the device is muted). Adjust the volume buttons to ensure the ringer is adjusted to an audible level.

2. Check audio output device

In addition to checking volume and mute settings, audio output may be directed to a connected Bluetooth device or other external speakers. Make sure your iPhone is disconnected from any such device, as this may be the reason why the ringtone is not working as expected. (We also mentioned this above)

3. Check for custom ringtones

If you set a custom ringtone, it might not be compatible with your iPhone. Try switching back to the default ringtone by going to Settings > Sounds & Haptics > Ringtone and selecting one of the standard options.

4. Disable the “Mute unknown callers” setting

If your iPhone’s ringtone works for known contacts but not unknown callers, check to see if the “Mute Unknown Callers” feature is enabled. Go to Settings > Phone > Mute Unknown Callers and turn off the setting if it’s on.

Issue	Action
Check Volume and Mute Settings	Adjust volume buttons and mute switch
Check Audio Output Device	Disconnect Bluetooth and other external devices
Check for Custom Ringtones	Switch to a default ringtone
Disable “Mute Unknown Callers”	Turn off the setting in Phone options

How To Solve Ringer on iPhone Not Working (Professional Method）

If you’ve tried the basic methods provided above and your iPhone’s ringtone still isn’t working properly, you can use more professional methods to fix the problem.

5. Check if your iPhone is stuck in Bluetooth or headphone mode

If your iPhone is stuck in Bluetooth or headphone mode, it may not be able to output sound via ringtone. This happens when your device thinks it’s still connected to the external audio device (even though it’s not connected).

Don’t worry, you can check if your iPhone is stuck in Bluetooth or headphone mode by doing the following:

• Turn off Bluetooth:

Open Control Center by swiping down from the top right corner of the screen (on newer iPhones) or swiping up from the bottom (on older models).

Find the Bluetooth icon and tap it to disable Bluetooth.

This will disconnect your iPhone from any paired devices and allow the ringer to work through the phone’s built-in speakers.

• Check headphone mode:

Plug a pair of headphones into the headphone jack (if your model has one), and then remove it.

For iPhones without a headphone jack, use a pair of Bluetooth headphones to connect and disconnect from the device.

This resets audio settings and ensures your iPhone doesn’t get stuck in headphone mode.

6. Restart or reset your iPhone

It is known that restarting your device can resolve many temporary glitches that affect your ringtones. For newer iPhones, press and hold the power button and either volume button until the power off slider appears. For older iPhones, press the Power button and the Home button. Slide to turn off the device, then wait a few seconds before turning it back on.

If the problem persists, consider a factory reset as a last resort. However, be sure to back up your data beforehand.

In addition, if you don’t want to spend too much time and want to solve the problem of your iPhone ringtone not working with a high first-time success rate, you can consider using AnyFix.

7. Use AnyFix to solve “Ringer on iPhone Not Working.”

AnyFix is a professional iOS system repair tool that can effectively solve this and many other iOS system problems. Its most important feature is its ability to quickly and effectively solve various iOS problems, including the iPhone ringtone not working problem.

AnyFix provides three repair modes that you can choose according to your needs. Standard mode repairs while keeping all data intact. AnyFix helps you quickly restore functionality to your iPhone without any technical expertise. It is trusted by countless users for its effectiveness and speed.

Step 1. Download AnyFix and run it on your computer > connect your iPhone to the computer > choose the System Repair on the top.

Step 2. Click on the 50+ iPhone Problems and then tap on the Start Now to go on.

Step 3. There are 3 modes for you to solve iPhone problems. It is recommended that you opt for standard repair, which does not carry any risk of data loss.

Step 4. You will see the Repair Completed page on the screen when AnyFix solved the problem.

Bonus Tip: How to Add Ringtones to iPhone from Computer

For anyone who has updated to iTunes 12.7 may find that there is no Tones tab because Apple removes the ability to manage ringtones and apps. Apple suggests you use the Sounds Settings on the device to redownload your ringtones. However, what if you want to transfer your favorite songs from the computer to the iPhone as ringtones? Then AnyTrans can help you with it.

This powerful iTunes alternative lets you transfer ringtones from computer to iPhone directly, you can also transfer songs to the iPhone as a ringtone. Get AnyTrans Now to make your custom ringtone.

Step 1. Open AnyTrans > Plug in your iPhone > Click Device Manager > Go to Category Management page.

Step 2. Click on the Ringtones option in the left menu and the Add tab on the top menu.

Step 3. Select the songs or ringtones you want to add to iPhone > Click Open tab to add to your iPhone.

Step 5. Go to Settings > Sounds > Ringtones on iPhone to check the transferred ringtones and select the ringtones you like as the ringtone of your iPhone.

FAQ About Ringer on iPhone Not Working

How do I get my iPhone ringer back on?

1. Check the Ring/Silent Switch: Look on the side of your iPhone for the switch above the volume buttons. If the switch is showing an orange color, it’s set to silent. Flip the switch towards the screen to turn the ringer back on.

2. Adjust Volume Settings: Use the volume buttons on the side of your iPhone to increase the ringer volume. You can also go to Settings > Sounds & Haptics and adjust the Ringer and Alerts slider.

3. Disable Do Not Disturb: If Do Not Disturb is enabled, it could be silencing your calls. Check this by going to Settings > Do Not Disturb and make sure it is turned off, or swipe into your Control Center and make sure the moon icon is not highlighted.

4. Check Focus Settings: If you have any Focus modes enabled (previously called Do Not Disturb modes), they might be set to silence calls. You can adjust these in Settings > Focus.

5. Restart Your iPhone: Sometimes a simple restart can resolve minor software glitches that may be affecting the sound settings.

How to unmute ringer on iPhone?

1. Check the Ring/Silent Switch: Look at the side of your iPhone for the Ring/Silent switch. If it’s showing orange, your iPhone is in silent mode. Flip the switch to the other position to unmute the ringer.

2. Adjust the Volume: Use the volume up button on the side of your iPhone to increase the ringer volume.

3. Check Do Not Disturb: Make sure Do Not Disturb (DND) mode is off. Open the Control Center and tap the DND icon to disable it if it’s active.

4. Focus Mode Settings: Check if any Focus mode is enabled that might be muting incoming calls and notifications. Go to Settings > Focus and ensure Focus modes are either off or appropriately configured to allow calls.

5. Ringtone Selection: Confirm that a ringtone is selected for incoming calls. Go to Settings > Sounds & Haptics > Ringtone and choose a ringtone.

Conclusion

All in all, dealing with iPhone ringtones that don’t work can be a headache. You can try the above methods: Check Volume and Mute Settings, Check Audio Output Device, Disable “Mute Unknown Callers”, etc. to check and repair.

But if you lack professional knowledge and want to solve the problem quickly, AnyFix is a reliable and professional iOS system repair tool that can help your iPhone get back to normal working quickly. Its user-friendly interface and proven effectiveness make it the first choice for fixing iPhone ringtone issues and more. If you’re having trouble with your iPhone ringtone, try AnyFix for a quick, easy, and successful fix.